ff
Description ──────────────────────────
The mo.blaze tens 3 of motogadget is the world's smallest 3-in-1 turn signal. It is both a turn signal, a tail light and a brake light in one piece.
Its tiny dimensions and reduced design almost make it disappear from the vehicle. As soon as it turns on, it is extremely bright thanks to IntensiLED® technology, the most powerful on the market!
At the same time, the additional side beam angle ensures better visibility and safety.
The turn signal is EEC approved as a front and rear direction indicator. The aluminum housing is CNC machined and available in a black anodized finish.
Advantages:
an extremely small aluminum housing
EEC approval, no registration or other required
increased visibility and safety thanks to an additional side beam angle
maximum brightness thanks to the most modern high-power LED technology (IntensiLED®)
330 kHz clocked electronic voltage processing, IC controlled constant current source and safe electronic protection
mounting thread is standard M8. Therefore, no special heat sink mounting adapter or nut is required.
Field of application
single mo.blaze tens1 indicator with M8 wire
M8 nut
2 snap-lock cable connectors
installation instructions
EEC approval, no registration or other required
increased visibility and safety thanks to an additional side beam angle
maximum brightness thanks to the most modern high-power LED technology (IntensiLED®)
330 kHz clocked electronic voltage processing, IC controlled constant current source and safe electronic protection
mounting thread is standard M8. Therefore, no special heat sink mounting adapter or nut is required.
Field of application
single mo.blaze tens1 indicator with M8 wire
M8 nut
2 snap-lock cable connectors
installation instructions
Unit price, consider ordering two indicators, to be used as a pair or four indicators for the front and rear.
Specifications and Features
- Total length with 29 mm thread
- Length without mounting thread 11 mm
- Largest diameter 11 mm
- Cable length about 110cm
- Weight with cable approx.20 g
- Mounting the M8 threaded bolt
- Power consumption approx. 1 Watt
If you are not equipped with the original LED, you will need an LED flasher unit that you will find HERE]. or use the products motogadget mo.flash, mo.wave, mo.stop or mo.relay +
