
09 72 16 08 59 or write to us
Pair of LED resistors 10W - 27 Ohm
pair power resistors for LED flashing. When fitting Led turn signals, flash frequency issues may occur, depending on the flasher relay installed. These resistors provide an effective remedy as they simulate approximately 17,5 watts of power at 12V.
Technical data: 27 ohm 25 watts
Scope supplied: 1 pair
Note: Resistors must always be connected in parallel.
Technical data :
Yellow wire = tail light (+)
Red wire = brake light (+)
Blue wire = Indicator (+)
Black wire = ground (-)
Width 80mm Height 100mm Depth 150mm
Year 2011 / Year 2020 / Year 2013 / Year 2006 / Year 2022 / Year 2015 / Year 2008 / Year 2024 / Year 2017 / Year 2010 / Year 2019 / Year 2012 / Year 2021 / Year 2014 / Year 2007 / Year 2023 / Year 2016 / Year 2009 / Year 2018