ff
+ 20 references for motorcycles
+ 20 of the best references for your motorcycle
Description ──────────────────────────
The mo.lock NFC is a contactless digital contactor that replaces mechanical contactors.
The associated key switches the contactless ignition on or off when approaching the mo.lock at a switching distance of approximately 4 centimeters
The mo.lock NFC is based on "Near-Field-Communication" technology and is therefore, unlike radio remote controls, extremely tamper-proof.
Each key is unique thanks to its numerical code. Only the correct digital code can operate the mo.lock. Neither the NFC key nor the mo.lock can wear out mechanically.
The mo.lock switches a car relay that can be loaded with up to 40 A - sufficient for any vehicle electrical system.
The installation can be hidden behind non-metallic parts such as a plastic side cover.
It therefore allows the complete removal of the original key switch. Clean appearance and freedom of design are guaranteed.
The two included keys are the size of a key ring and can be used to switch on-board voltage or to learn new keys.
A maximum of 125 keys can be learned on a mo.lock NFC.
Other keys are available from us.
The mo.lock NFC has an LED on the front side, which shows the switching states with different colors. To protect the vehicle battery, the standby current is only 3,2mA when switched off, reduced to 1,5mA after 16 hours and 0,75mA after another 8 days.
We do not recommend using the mo.lock in conjunction with an immobilizer.
ATTENTION: please order the connection cable separately. MG14002011
Advantages:
_ This is a tamper-proof solution and one of the safest on the market!
_ VSeach key has a unique code
_ Key and mo.lock are not subject to mechanical wear
_ the keys do not need a battery and therefore cannot break down
_ No overloading or burning of contacts possible thanks to indirect switching via a 40 A load relay
_ The mo.lock NFC is very small and can be mounted hidden in many places
_ The mo.lock NFC is overmolded with a non-flammable thermoset and therefore 100% resistant to water and vibrations (IP69)
_ An integrated RGB LED indicates the status of the mo.lock NFC when in use and when learning new keys
_ To protect the vehicle battery, the mo.lock NFC automatically reduces the current in 3 steps when not in use.
Technical data:
_ Diameter of the transmitter/receiver on the vehicle 32 mm
_ Height 12 mm without plug-in contacts and housing
_ Weight approx. 35g
_ Mounting 1 M3 threaded sleeve on the back, bracket with 2 mounting holes
_ Operating voltage8V - 18V
_ Operating temperature -20°... +80°C
What the kit includes:
_ mo.lock NFC with high quality cable terminals for 3 wires in a thermoset injection molded case
_ 2 keys
_ 1 12V / 40A auto relay with spade terminals and insulating sleeves
_ Detailed assembly and operating instructions
_ mo.lock wiring harness ready for quick and easy installation
User Manual: https://manuals.motogadget.com/mo-lock-nfc/en/
